TIMING BELT 420 H - PIX X'act ® CT

PIX 420-H X'act® CT timing belt - Type: H - Effective length: 1066 mm - Number of teeth: 84

The PIX X'act® CT timing belt in profile "L" is available in the following standard widths: 19.05mm (075"), 25.4mm (100"), 38.1mm (150"), 50.8mm (200"), 76.2mm (300").

PIX X'act® CT rubber timing belts have fiberglass reinforcement and a nylon fabric covering on the toothed side. The belt is endless without a joint. The standard H-profile is a timing belt with inch-based tooth pitch and trapezoidal teeth. Timing belts are an essential component of many machines today. They are primarily used for power transmission or conveying. A timing belt is best described as a belt with cast-in teeth on the inside that secure the belt's position in the pulley. By using an H-profile timing belt, you can build a belt drive with highly precise synchronous characteristics.

High efficiency thanks to the positive engagement between the timing belt and pulley.
Fiberglass reinforcement ensures excellent tensile strength, flexibility, and high elongation resistance.
High precision in your belt drive.
Improved stress distribution
Temperature range: -25°C to +100°C.

The standard timing belts are manufactured according to current DIN and ISO standards. All PIX H timing belts comply with the REACH regulation.

Important: These timing belts are cut to width upon order and cannot be returned.

Example of timing belt: 420-H-100

100 = "1" = Width in inches.
H "½" = Type/Tooth spacing in mm.
1066 = Effective length [mm].
"42.0" = Length [inches].

Also mentioned by other brands:

OPTIBELT ZR ® 420-H-200
MEGADYNE ISORAN ® 420-H-150
GATES ® POWERGRIP CTB 420-H-100
CONTITECH ® CONTI SYNCHROBELT 420-H-075
PIX X'act ® CT - H SECTION 420-L-050