ConCar V-belt XPZ 947 Lw 10x8 MM

Product overview

For replacing a worn belt or equipping a new drive system, the ConCar V-belt XPZ 947 Lw 10x8 mm is a suitable, defined XPZ design. It has an effective length of 947 mm and a cross-section of 10 × 8 mm. This allows for precise identification of the required belt size based on the existing pulleys and belt dimensions. With an effective length of 947 mm, this design falls within the shorter range of available XPZ belts.

Dimensions at a glance

• Profile: XPZ
• Effective length Lw: 947 mm
• External length La: 960 mm
• Internal length Li: 909 mm
• Cross-section: 10 × 8 mm

The standardized XPZ profile includes the trapezoidal shape typical of narrow V-belts and a flank angle of approximately 40°. The belt thus fits into a matching XPZ pulley via its flanks. Therefore, when replacing a belt, not only the length but also the existing profile is crucial.

Structure and function

The belt has a trapezoidal cross-section with a flank angle of approximately 40° and a toothed underside. This design combines defined flank contact in the pulley with good flexibility. It is designed for use in suitable narrow V-belt pulleys and promotes uniform power transmission across the contact surfaces of the belt flanks.

Application examples

Narrow V-belts with the XPZ profile are used, among other things, for fan and blower drives, pumps, compressors, conveyors, and machine assemblies. The 947 mm version is the right choice if the existing drive is designed for precisely this effective length. For a reliable selection, the belt profile and pulley geometry should always be taken into account.

Assembly and selection

When changing a belt, it is advisable to simultaneously check the condition of the pulleys and the tensioning device. The new belt must be fully seated in the groove. Correct tension and alignment help to prevent slippage, unnecessary heating, and premature wear.

For selection according to DIN 7753 / ISO 4184, the profile and effective length of the existing drive should be compared with the specifications of the new belt. The outer and inner lengths can serve as additional comparison values. The belt specified here has 947 mm Lw, 960 mm La, and 909 mm Li.

Maintenance and replacement

A V-belt should be regularly inspected for visible cracks, frayed edges, unusual shiny spots, abrasion, or other signs of wear. Changes in tension or a distinct squeaking noise can also indicate a need for maintenance in the drive system. When replacing the belt, it is advisable to check the pulleys and the alignment of the entire drive.

Frequently Asked Questions

A suitable replacement belt is selected based on its profile and the required effective length. For this product, these are XPZ and 947 mm Lw. The specifications of 960 mm outer length and 909 mm inner length help to match it to an existing belt size.

Delivery

A ConCar narrow V-belt in the described XPZ 947 Lw version with a 10 × 8 mm cross-section is supplied. Please compare the specifications with your existing belt and/or pulley before ordering to ensure the profile and length are compatible with your drive.