ConCar - V-belt C 190 / 4825 Li 22x14 mm

Product overview

This ConCar C-type belt is designed for classic power transmission via a 22 × 14 mm profile. The specified inner length of 4,825 mm indicates the specific belt size for replacement. C-type V-belts are frequently used where a wider, classic profile is required for machine, pump, fan, and conveyor drives.

With a length of 4,825 mm, this version belongs to the upper size range within the C-series offered here. Such longer lengths are used in appropriately dimensioned drives; the specific design, the pulleys, and the drive power remain decisive.

Standard profile and dimensions

The C-profile is a classic V-belt according to DIN 2215 / ISO 4184. Its cross-section measures 22 × 14 mm. The flank angle of the classic V-profile is 40°. The specified Li-length refers to the inner length of the specific belt.

• Profile: C
• Cross-section: 22 × 14 mm
• Internal length Li: 4,825 mm
• Effective length / reference dimension Ld: 4,883 mm
• External length La: 4,913 mm

Construction and materials

The C version uses the wider, classic cross-section of 22 × 14 mm. The rubber body and embedded tensile cords form the load-bearing belt, while the fabric covering protects the surface. According to product data, this version is oil and heat resistant as well as antistatic; ozone and abrasion resistance are also mentioned. This supports its use in industrial environments.

Key features and benefits

• 22 × 14 mm classic C-profile
• Internal length Li 4,825 mm with the specified Ld/La values
• For suitable C-pulleys and appropriately designed drives
• For larger machine, pump, fan and conveyor drives

Typical applications

The C-profile belt is found in larger, conventional belt drives, including those on pumps, compressors, large fans, conveyor systems, and industrial machinery. Agricultural machinery and harvesting equipment are also among its applications.

• Agricultural and harvesting machinery
• large fans and HVAC systems
• Pumps and compressors
• Conveyor, wood and production facilities

Assembly and tension

Correct tension is essential for drive system design. Insufficient tension can promote slippage and heat generation, while excessive tension puts greater stress on the belt and bearings. Therefore, the tension should be set according to the machine or belt manufacturer's specifications. The alignment of the pulleys also affects the belt's operation.

Drive design

For a suitable drive system, the belt profile, effective pulleys, and belt length must be compatible. Only the combination of motor power, speed, gear ratio, and operating conditions will determine whether the selected belt size is suitable for the machine. In multi-belt drives, the belts must be selected according to their intended configuration.

Maintenance and lifespan

A V-belt does not require complex maintenance. Regular visual inspections and tension checks as part of routine maintenance are advisable. If cracks, excessive wear, or damage are found, the belt should be replaced and the cause of the premature wear investigated.

storage

Until installation, the belt should be stored dry, clean, and protected from direct sunlight, heat sources, and oil. It should not be unnecessarily bent or subjected to stress from sharp objects.

Comparable designations from other manufacturers

Suitable classic V-belts can be found on the market from manufacturers such as Gates, Optibelt, Continental, and Megadyne. Switching brands only makes sense if the belt's technical specifications are compatible with the existing drive system. Therefore, the profile and length of this ConCar belt are the key specifications for comparison.

Frequently Asked Questions

What does Li mean?
Li stands for the inner length of the V-belt. For this item, the specified inner length is 4,825 mm.

How do I identify the correct size?
The key factors are profile C, the inner length Li of 4,825 mm, and the matching pulley. The additional length specifications Ld and La serve to clearly define the size.

Can a different brand of belt be used?
For a replacement, the profile and length must match and be compatible with the existing drive. The brand alone is not a sufficient selection criterion.

Delivery

You will receive the selected ConCar V-belt in the specified profile and length. The specifications C, C 190, 4.825 Li and 22 × 14 mm mentioned in the product name are decisive for the order. Availability is indicated separately in the shop.