ConCar - V-belt C 102 / 2600 Li 22x14 mm

Product overview

With a cross-section of 22 × 14 mm, this ConCar V-belt belongs to the classic C-profile. Its inner length Li is 2,600 mm. This makes the belt suitable for a specific C-drive with a matching pulley geometry and the required length. It is suitable both as a replacement for a worn belt and for the maintenance of existing machines and systems.

This 2,600 mm version is in the middle range of the C-series offered here. The belt size is particularly suitable if the profile, length, and pulley geometry of the existing drive match the specified data.

Standard profile and dimensions

The C-profile is a classic V-belt according to DIN 2215 / ISO 4184. Its cross-section measures 22 × 14 mm. The flank angle of the classic V-profile is 40°. The specified Li-length refers to the inner length of the specific belt.

• Profile: C
• Cross-section: 22 × 14 mm
• Internal length Li: 2,600 mm
• Effective length / reference dimension Ld: 2,658 mm
• External length La: 2,688 mm

Construction and materials

The C version uses the wider, classic cross-section of 22 × 14 mm. The rubber body and embedded tensile cords form the load-bearing belt, while the fabric covering protects the surface. According to product data, this version is oil and heat resistant as well as antistatic; ozone and abrasion resistance are also mentioned. This supports its use in industrial environments.

Key features and benefits

• 22 × 14 mm classic C-profile
• Internal length Li 2,600 mm with the specified Ld/La values
• For suitable C-pulleys and appropriately designed drives
• For larger machine, pump, fan and conveyor drives

Typical applications

The C-profile belt is found in larger, conventional belt drives, including those on pumps, compressors, large fans, conveyor systems, and industrial machinery. Agricultural machinery and harvesting equipment are also among its applications.

• Agricultural and harvesting machinery
• large fans and HVAC systems
• Pumps and compressors
• Conveyor, wood and production facilities

Assembly and tension

Before replacing the belt, first check that the profile and length of the existing belt match this model. When fitting the new belt, ensure it sits securely in all grooves. After tensioning, check the belt's movement to ensure it runs centered without any unusual noise or lateral movement.

Drive design

When designing a belt system, factors such as the drive unit's power output, rotational speeds, center distances, number of belts, and pulley design must be considered, in addition to the belt size. The individual belt length alone does not indicate the power that can be transmitted.

Maintenance and lifespan

The lifespan of a V-belt depends heavily on correct tension, proper alignment, and suitable pulleys. Dirt, incorrect tension, and damaged pulleys can accelerate wear. Therefore, when replacing a belt, not only the belt itself but also the condition of the pulleys should be checked.

storage

A suitable storage location protects the belt from moisture, direct sunlight, heat, and oily contaminants. This ensures that the fabric and rubber components remain in a condition suitable for their intended application until installation.

Comparable designations from other manufacturers

Comparable classic V-belts are also offered by manufacturers such as Gates, Optibelt, Continental, and Megadyne. However, for a direct replacement, brand names alone are not the deciding factor; rather, the belt must match the profile, length, and requirements of the existing drive system.

Frequently Asked Questions

What does Li mean?
Li stands for the inner length of the V-belt. For this item, the specified inner length is 2,600 mm.

How do I identify the correct size?
The key factors are profile C, the inner length Li of 2,600 mm, and the matching pulley. The additional length specifications Ld and La serve to clearly define the size.

Can a different brand of belt be used?
For a replacement, the profile and length must match and be compatible with the existing drive. The brand alone is not a sufficient selection criterion.

Delivery

You will receive the selected ConCar V-belt in the specified profile and length. The specifications C, C 102, 2600 Li and 22 × 14 mm mentioned in the product name are decisive for the order. Availability is indicated separately in the shop.