ConCar - V-belt profile 8 / 530 Li 8x5 mm

Product overview

This ConCar V-belt, profile 8, focuses on its suitable profile shape and specified inner length of 530 mm. When installed, the V-belt runs in the appropriate pulley grooves and transmits power through friction. Within the length range offered here, this variant is one of the shorter versions. Profile 8 is also known as M-profile and is suitable for compact V-belt drives in machines, pumps, fans, and similar units. Crucially, the existing pulley must be designed for the 8 × 5 mm profile.

Profile and dimensions

Three length specifications are relevant for unambiguous selection: Li denotes the inner length (530 mm), Ld the reference length (549 mm), and La the outer length (561 mm). The cross-section is 8 × 5 mm. Compare these specifications with the markings of the existing belt or with the machine's technical data. The M-profile has a cross-section of 8 × 5 mm. It is not interchangeable with the larger profile 6, profile 10, or other cross-sections simply because some length specifications are similar.

Structure and properties

According to the specifications, the belt body is made of chloroprene rubber (neoprene) and contains a polyester tensile cord. The stated properties include resistance to oil, heat, abrasion, and ozone. An antistatic version is available from the manufacturer upon request for this profile and should be confirmed for the specific variant if required.

Areas of application

Profile 8, also known as M-profile, is suitable for compact V-belt drives in machines, pumps, fans, and similar equipment. Crucially, the existing pulley must be designed for the 8 × 5 mm profile.

Selection and assembly

Before ordering, the number 530 alone should not be the deciding factor. Ensure that the belt profile is 8, the inner length Li 530 mm, and the cross-section 8 × 5 mm. The pulleys must be aligned and must not have any damaged or sharp-edged grooves. Install the belt without using levers or forcibly tightening it; the required tension depends on the machine manufacturer's specifications. After starting up the machine, it is advisable to check the seat and tension.

Comparable terms

Other manufacturers use their own product lines and naming conventions for V-belts. Therefore, to compare belts with those from Gates, Optibelt, Continental, or Megadyne, the profile and length system must be matched; a similar name alone does not guarantee interchangeability.

Frequently Asked Questions

Li stands for the inner length of the belt. This item is specified with 530 mm Li, 549 mm Ld, and 561 mm La. It only fits a drive designed for profile 8 with 8 × 5 mm. Information on the required power, speed, and voltage can be found in the respective machine or drive documentation.

Delivery

The product supplied is a ConCar V-belt, profile 8, with an inner length of 530 mm and a cross-section of 8 × 5 mm. The length specifications are 549 mm (Ld) and 561 mm (La). Pulleys or other accessories are not included in this product description.