ConCar - V-belt AVX13 2025 La 13x10 mm

Product overview

With its AVX13 profile and 2,025 mm outer length, this ConCar V-belt is suitable as a replacement belt for a correspondingly designed belt drive. Power is transmitted via the belt flanks to the appropriate pulley; the cross-sectional area is 13 × 10 mm.

Dimensions

• Profile: AVX13
• Cross-section: 13 × 10 mm
• External length (La): 2,025 mm
• Effective length (Lw): 2,007 mm
• Internal length (Li): 1,962 mm

Construction and use

The open-flanked, molded-tooth underside enhances flexibility as it rotates over the pulleys. The belt is made of a rubber compound with reinforced polyester/glass fiber tensile members. It is heat- and oil-resistant as well as antistatic. In the automotive sector, AVX belts are suitable for driving generators and other auxiliary equipment, among other applications. The precise application cannot be determined solely by the belt length; it must match the specifications of the engine or machine.

During installation, also check whether the intended tensioning range of the drive is compatible with a belt with La = 2,025 mm. The three length specifications describe different measurement references for the same belt: La is the outer length, Lw the effective length, and Li the inner length.

Selection and assembly

Before installation, compare the complete belt designation with the technical documentation. Damaged or heavily worn pulleys can impair the new belt. After installation, the specified tension must be set and checked according to the equipment manufacturer's instructions.

Comparable terms

AVX13 is compared to XPA in the ConCar profile assignment. For alternative brands such as Gates, Optibelt, Continental, or Megadyne, the profile, reference length, and approval for the specific drive system must match; the brand name alone does not guarantee a suitable replacement.

Frequently Asked Questions

Which length is crucial? Compare the specification AVX13 2.025 La with the labeling of your previous belt and the manufacturer's documentation. Pay attention to whether it uses La, Lw, or Li.

Storage and delivery

Until installation, the belt should be stored without tension, in a dry place, and protected from direct heat and sunlight. Do not kink or twist it. A ConCar V-belt in the profile and length specified above is supplied.