ConCar - V-belt AVX13 1225 La 13x10 mm

Product overview

The ConCar AVX13 V-belt with an outer length (La) of 1,225 mm is designed for drives where this exact profile and length are specified. Its 13 × 10 mm cross-section transmits the rotary motion via suitable pulleys and can drive auxiliary components depending on the vehicle or machine design.

Dimensions

• Profile: AVX13
• Cross-section: 13 × 10 mm
• External length (La): 1,225 mm
• Effective length (Lw): 1,207 mm
• Internal length (Li): 1,162 mm

Construction and use

The open-flanked, toothed underside enhances flexibility as it rotates over the pulleys. The belt is made of a rubber compound with reinforced polyester/glass fiber tensile members. It is heat- and oil-resistant as well as antistatic. Depending on the drive system, this type of belt can be used to operate an alternator, cooling fan, water pump, or compressor. The manufacturer's specifications for the specific belt drive always take precedence.

If the vehicle or machine documentation specifies the outer length, compare it directly to La = 1225 mm. If a different length designation is used, the values ​​Lw and Li will help with the comparison. These three length specifications describe different measurement references for the same belt: La is the outer length, Lw the effective length, and Li the inner length.

Selection and assembly

For replacement, both the profile and length are important. Check the grooves of the discs for wear and ensure correct alignment during installation. The required tension can be found in the drive's instructions; a general setting is not suitable for every system.

Comparable terms

AVX13 is compared to XPA in the ConCar profile assignment. For alternative brands such as Gates, Optibelt, Continental, or Megadyne, the profile, reference length, and approval for the specific drive system must match; the brand name alone does not guarantee a suitable replacement.

Frequently Asked Questions

Which length is crucial? Compare the specification AVX13 1.225 La with the labeling of the previous belt and the manufacturer's documentation. Pay attention to whether it uses La, Lw, or Li.

Storage and delivery

Store the belt in its natural shape in a dry, dark place. Avoid pressure points, sharp bends, and contact with aggressive chemicals. A ConCar V-belt is supplied in the profile and length specified above.