ConCar - V-belt AVX13 1000 La 13x10 mm

Product overview

This ConCar AVX13 V-belt is designed for a drive system with a length of 1,000 mm and a cross-section of 13 × 10 mm. The belt connects driving and driven pulleys and is suitable – depending on the specific system – for driving vehicle auxiliary components.

Dimensions

• Profile: AVX13
• Cross-section: 13 × 10 mm
• External length (La): 1,000 mm
• Effective length (Lw): 982 mm
• Internal length (Li): 937 mm

Construction and use

The open-flanked, toothed underside enhances flexibility as it rotates over the pulleys. The belt is made of a rubber compound with reinforced polyester/glass fiber tensile members. It is heat- and oil-resistant as well as antistatic. The profile is designed for compact belt drives where the corresponding AVX cross-section is specified. Depending on the design, the belt can be used to drive fans, pumps, or other auxiliary components.

If the vehicle or machine documentation specifies the outer length, compare it directly to La = 1,000 mm. If a different length designation is used, the values ​​Lw and Li will help with the comparison. These three length specifications describe different measurement references for the same belt: La is the outer length, Lw the effective length, and Li the inner length.

Selection and assembly

For replacement, both the profile and length are important. Check the grooves of the discs for wear and ensure correct alignment during installation. The required tension can be found in the drive's instructions; a general setting is not suitable for every system.

Comparable terms

AVX13 is compared to XPA in the ConCar profile assignment. For alternative brands such as Gates, Optibelt, Continental, or Megadyne, the profile, reference length, and approval for the specific drive system must match; the brand name alone does not guarantee a suitable replacement.

Frequently Asked Questions

Which length is crucial? Compare the specification AVX13 1000 La with the labeling of your previous belt and the manufacturer's documentation. Pay attention to whether it uses La, Lw, or Li.

Storage and delivery

Until installation, the belt should be stored without tension, in a dry place, and protected from direct heat and sunlight. Do not kink or twist it. A ConCar V-belt in the profile and length specified above is supplied.